company profileproductsfaqcontact us

 Product Literature:
 
(Acrobat Reader Required)

  
QB 20 Data Sheet

Get Acrobat Reader

Products

Proxim
Tsunami QuickBridge 20
Wireless Outdoor Bridge Product Family

Tsunami QuickBridge 20 is a faster, easier, and more cost-effective alternative to leased lines, and 802.11b bridges—providing toll quality outdoor connectivity between buildings at distances of up to six miles.

Faster Return on Investment Than Leased Lines

Tsunami QuickBridge 20 eliminates the installation costs and recurring fees associated with standard T1 or E1 installations. As a leased-line replacement for a single T1/E1, it pays for itself in about a year. Payback period can further be reduced to less than 2 months when replacing multiple leased lines. And, with the addition of an optional T1 or E1 port, you can establish both voice and data connectivity between buildings and eliminate the recurring leased line costs.

At 20 Mbps, Tsunami QuickBridge 20 provides data connectivity at nearly four times the actual throughput of comparably priced 802.11b bridging solutions, and more than five times the speed of a standard T1/E1 installation. At the same time, Tsunami QuickBridge 20 delivers up to 99.999% reliability — exceeding that of leased lines. And, because it is wireless and license-free, you can get connected without delay.

Fast, Easy Installation
Tsunami QuickBridge is the easiest-to-install outdoor bridge on the market - in can be installed in hours, not days. The solution includes two radio units with integrated antennas, and all of the necessary documentation, cables and mounting hardware. An antenna alignment tool and uses audible tones to ensure that the antennas are properly aligned before you leave the installation site.

About the Tsunami Product Family
The Tsunami family of Ethernet bridges provides wireless solutions that meet the growing demand for transparent and reliable high-speed network interconnectivity. In addition to Tsunami QuickBridge 20, the most cost-effective outdoor bridging solution available today, the Tsunami product line includes:

  • Tsunami 10, a cost-effective, high capacity alternative to multiple wireline T1 connections
  • Tsunami 45 and Tsunami 100, carrier-class building-to-building connectivity for voice and data
  • Tsunami 480, the world's first license-exempt Ethernet bridge to provide Gigabit wireless connectivity using native IP.
Ordering Information
48001-001 Tsunami QuickBridge 20 Link - 110 VAC
48001-002 Tsunami QuickBridge 20 Link - 110/220 VAC
48001-011 Tsunami QuickBridge 20 + T1 Link - 110 VAC
48001-012 Tsunami QuickBridge 20 + E1 Link - 110/220 VAC

Technical Specs:

Product Specifications

PRODUCT >> Tsunami QuickBridge 20 Tsunami QuickBridge 20+T1/E1
Frequency Band 5.725-5.825 GHz 5.725-5.825 GHz
Aggregate Throughput 18 Mbps 18 Mbps
Frequency Channel Plans 7 7
Threshold
(BER=1X10-6)
-89 dBm -89 dBm
EIRP Output Power +36 dBm +36 dBm
System Gain
(Including Antenna)
124 dB 124 dB
Distance
(Miles/KM)
Up to 6 miles/10 Km Up to 6 miles/10 Km

System

Capacity
QuickBridge 20
QuickBridge 20 + T1/E1
18 Mbps aggregate throughput
12 Mbps aggregate data throughput,
3 Mbps/4 Mbps dedicated T1/E1
System Gain 124 dB
Maximum Distance 6 miles/10 Km line of sight
Transmit Output Power +16 dBm max; +15 dBm typical
Antenna Integrated LHCP; 20dBi, 10º
azimuth by 10º elevation
Maximum Receive Level -20 dBm error free
Latency 2.5 msec typical, 5 msec maximum
Access Method Time Division Duplex
Modulation Technique QPSK with equalization and FEC
Security Key 16 Character Security ID (Alphanumeric),
authentication and PN transmission
scrambling
Compliance US: FCC Part 15.247 ISM;
Canada: IC RSS 210

Data Interface

Ethernet Interface 10/100BaseT via AC power adapter
Connector RJ-45 female modular plug
w/weather-protected shell
Cable Type CAT5
Compliance IEEE 802.3

Digital Line Interface

T1 Digital Interface Optional Channel via indoor external T1 multiplexer
  Connector RJ-45 femaile modular jack
  Compliance ANSI T1.403
E1 Digital Interface Optional Channel via indoor external E1 multiplexer
  Connector Balanced RJ-45 femaile modular jack, 8 pin
  Compliance ITU-T Rec. G.703

Management

Local, Remote Access QuickBridge Utility (Java-based GUI) for discovery, status and configuration
Software Upgradeable Over-the-air reprogramming
Security 2-level password access on Utility

Power/Environment

QuickBridge
AC Power Adapter included, 110 VAC or 220 VAC,
450mA; Output: 24V DC, 1 Amp
DC Power (to unit) +18 to +28 VDC
Power Connector Power over Ethernet CAT5 cable
RJ-45 connector
Operational Temperature -33º to 55º C
Storage Temperature -55º to 85º C
Humidity 5-100% condensing
Altitude Up to 10,000 ft
Safety UL 1950, EN60950
Wind Loading 115 mph
T1/E1 Multiplexer
AC Power Built-in AC power supply,
110/220 VAC, 1 Amp
Operational Temperature 0º to 50º C
Humidity Up to 90% non-condensing

Physical Unit

QuickBridge Unit
  Size (WxHxD) 10.5x10.5x7 inches
26.5x26.5x14.4 cm
  Weight 10lbs /4.5kg
  Mounting (Installation) Pole Mount 1.5-2.75”/ 3.08 – 6.98 cm O.D.
(hardware included for 1.75”/ 4.4 cm O.D.)
T1/E1 Multiplexer
  Size (WxHxD) 8.4x1.7x9.7 inches
21.34x4.38x24.64 cm
  Weight 2.7 lbs/1.25 kg

Shipping Configuration

2 QuickBridge Radio Units, 2 sets mounting hardware, 2 power adapters, 2 sets 50 meter CAT5 cable, 2 sets user documentation & utilities on CD-Rom, 2 external T1/E1 multiplexers on applicable SKUs

Frequency Channel

Channel Plan Frequency
3A 5742.19 MHz
3B 5775.39 MHz
3C 5808.59 MHz
4A 5743.85 MHz
4B 5764.60 MHz
4C 5785.35 MHz
4D 5806.10 MHz

 

homeprofileapplicationsproductssite survey
FAQ'scontact us

copyright 2003-2013 • AABroadband